Elipta Walkover Quartz Recessed RGB 24v DC Uplight 270lm
43 in stock
- Product Overview
- Downloads
- Reviews
The Elipta Walkover Quartz Recessed RGB 24v Uplight is ideal for striking lighting effects on walls, shrubs, small trees and low level architectural features. Using Red, Green and Blue LEDs, these fittings can be controlled to use individual colours or an array of colours, smoothly changing at different cycle speeds using a Light Symphony Colour LED Controller or a DMX controller. This garden light provides a powerful 30° uplighting beam, using 3x 1 watt LED lamps, while maintaining a typical top lens temperature of under 40 degrees C making it a good light for walkover areas.
|
Colour / Finish : |
304 grade stainless steel top |
|
IP Rating : |
IP67 |
|
Wattage : |
3.5w |
|
Lumens : |
250lm |
|
Construction : |
Cast aluminium body with borosilicate glass lenses, stainless steel top ring and plastic soil sleeve |
|
RGB : |
Full RGB colour spectrum operated from Light Symphony Colour LED Controller or DMX Controller |
|
Installation : |
Direct burial in the ground : prewired with rubber cable and 20mm IP68 gland for connection to mains supply via a separate underground joint kit ( order T9969 separately). Provide 300mm depth of shingle drainage below the uplight: do not use in waterlogged ground. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation. |