🎄Merry Christmas and a Happy New Year from all of us at Lighting For Gardens!🎄

Our last dispatch of 2024 will be at 11:30am on Friday, 20th December.

Any orders placed after this time will be dispatched when we return Thursday, 2nd January 2025.

Elipta Opal Walkover DMX Kit

Elipta Opal Walkover DMX Kit

Product No: E995DMXKIT

2 in stock

Opal Walkover DMX Kit: 24v IP67 colour changing, outdoor lighting system, part of the remote control Smart lighting range.
  • Product Overview

    • The Elipta Opal Walkover DMX Kit helps you create an atmosphere in your garden by adjusting the brightness of the light and giving you access to a whole new colour spectrum. Whether you want all your garden lights to be a cool blue or just need some lights dimming down later in the evening, the DMX kit offers a complete garden light solution. This kit has the necessary components to install a colour changing garden light system, controlled by B30DMX Elipta Wall Mount 4 Channel DMX controller with colour wheel (supplied).

    The kit is designed to give you the essential items needed to install a basic outdoor DMX system and allows other components to be added to the kit at a later stage. It comprises of 4 x E995RGBF Elipta Walkover Opal Frosted Recessed LED light fittings, 1x touch pad/wall controller, 1 x T3800 6 way IP68 junction box, 1x T2435PT Elipta 35w power supply, 1x T9802 IP 65 junction box and 2 x T9972 20mm Elipta cable glands.

    Colour/Finish:  RGB
    IP Rating :  IP67
    Input Voltage: 24v
    Installation for lights:

    Direct burial in the ground : prewired with rubber cable and 20mm IP68 gland for connection to mains supply via a separate underground joint kit (order T9969 separately.) Provide 300mm depth of shingle drainage below the uplight: do not use in waterlogged ground.
    Using a single a RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation.                                        
    Installation for wall switch:

    The DMX wall switch requires power from either 12v or 24v DC. The switch fits on a standard 1 gang back box or drylining box. Install switch on an inside wall, typically inside a conservatory or dining room overlooking the garden.                                     
     
     
  • Downloads
  • Reviews