Elipta Navigator Minor - Stainless Steel - 12v - White LED - Round
Product No: E3111W-N
78 in stock
Navigator Minor is a low energy, high output l.e.d. deck and recessed light which consumes a small amount of power and stays cool to the touch.
£39.60
- Product Overview
- Downloads
- Reviews
The Elipta Navigator Minor (stainless steel) 12v is a white LED deck and recessed light which consumes a tiny amount of power and stays cool to the touch. The 0.3w LED produces a wide beam diffused by the 16mm diameter frosted lens and it is used either to mark out the shape of a deck, patio or terrace or to outline paths and to provide marker lighting in step risers. To outline a deck or patio space with a distinctive shape, begin at the corners of the decking or paving and space LED recessed garden lights at about 60cm - 1m apart in step risers, space them about 60cm apart along the centre line of the riser.
| Colour/Finish: | Smart 316 grade stainless steel is a popular choice for modern garden settings |
|---|---|
| IP Rating: | IP65 |
| Lamp Type: | 0.3w 4000K cool white LED |
| Lumens: | 21.5lm |
| Input Voltage: | 12v 0.3w: NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator LED lights. If powering from a 12v ac wire-wound transformer, ensure transformer is loaded to at least 60% of nominal rating. |
| Construction: | Each light contains long life high-output LED resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. Comes supplied with 1m H05RN two core cable. They can be recessed without the sleeve in decking sleeper walls and other materials using a 28mm wood drill bit. Diameter 40mm (sleeve 32mm; 28mm cutout without sleeve); recess depth 75mm. The top section can be unscrewed to allow insertion of theatrical coloured gels |
| Installation: | Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit. |