Elipta Navigator Eye - Copper - 12v - Warm White LED - Eyelid
Product No: E3421WW
Out of stock
E3421WW is a low energy, high output warm white LED deck and recessed light which consumes a small amount of power and stays cool to the touch.
£80.40
- Product Overview
- Downloads
- Reviews
The Elipta Navigator Eye (copper) 12v is a low energy, high output warm white LED deck and recessed light which consumes a small amount of power and stays cool to the touch. The natural copper will weather to a nutty brown colour with some verdigris patina after a few months. The warm white LED produces a wide 100° beam softened by the 28mm diameter frosted lens to provide soft lighting compatible with the colour of halogen garden lighting. Install this garden light to illuminate across individual steps or in a wall about 40cm above a patio or deck.
| Colour/Finish: | Natural copper weathers to a mottled brown finish which blends well with red brick and timber, especially darker hardwood decking |
|---|---|
| IP Rating: | IP65 |
| Lamp Type: | 1w 2700K warm white LED |
| Lumens: | 101lm |
| Construction: | Long life high-output LED resin-encapsulated behind a frosted glass lens in a stainless steel case. The case has a spring mount which locates the light in a sleeve used to prepare positions in concrete, paving or walls. Comes supplied with 1m H05RN two core cable. They can be recessed without the sleeve in decking sleeper walls and other materials using a 44mm hole saw. Diameter 60mm (sleeve 48mm; 44mm cutout without sleeve); recess depth 75mm. |
| Input Voltage: | 12v 1.5w: NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator LED lights. If powering from a 12v ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating. |
| Installation: | Navigator lights can be arranged in custom layouts using cable joint kits and 1.5mm cable, which is more flexible than kit-type products. Connect to the end of a low voltage cable using T9962 cable joint kit; for splicing into a run of cable use T9963 cable splice kit. |
| Accessories: | The top section of this LED light can be unscrewed to allow the insertion of theatrical coloured gels to enable you to customise your garden lighting system. |