Elipta Micro Waymarker 360-12/24v DC-3w-100lm-2700K-IP67-Stainless Steel
34 in stock
- Product Overview
- Downloads
- Reviews
The Elipta Micro Waymarker (stainless steel) 360 is compatible with both 12v and 24v DC LED power supplies. 360° light output from 3 windows allows you to softly light the path or driveway and the planting bed or lawn behind. The Micro Waymarker has a glass lens that is raised to the top of the dome, preventing debris from settling and blocking the light output. The light is located by an "O" ring on the body into a sleeve tube so that external screw fixings can't be seen. It may also be used as a deck light. Purchase LED power supply separately. We recommend using a 12v constant voltage dc power supply for optimum performance.
| Colour/Finish: | Smart 316 grade stainless steel is a popular choice for modern garden settings |
|---|---|
| IP Rating: | IP67 |
| Construction: | Stainless steel top plate is attached to anodised aluminium body which push fits into the aluminium tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. 1.5m cable via rear entry cable |
| Input Voltage: | 12v / 24v DC |
| Wattage: | 3w |
| Light Output: | 100lm |
| Beam Angle: | 360° |
| Colour Temp: | 2700K warm white |
| Life Span: | Approximately 50,000 hours |
| Installation: |
The anodised aluminium sleeve is built into the floor/paving during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. Suitable drainage should be provided below each fitting to prevent water logging. Micro Waymarkers should not be installed in ground subject to water logging. Connect input cable to cable from an LED power supply using T9962 cable joint or T9963 cable splice kit or T9969 underground joint kit |