Elipta Polar Bollard Light - Square - Graphite - Warm White LED
7 in stock
- Product Overview
- Downloads
- Reviews
The Polar 240v bollard light has 12 built in 1w warm white LED’s in the top of the fitting to give you glare free lighting along paths, driveways and around decking and terraces. The Polar may be bolted to paving and slabs or to an optional ground-mount which can be installed in concrete prior to electrical installation. An optional ground spike is available for installation in planting and lawn areas (Purchase separately)
| Colour/Finish: | Graphite grey powder coated aluminium |
|---|---|
| IP Rating: | IP54 |
| Construction: | Die-cast aluminium with pre-treatment for outdoor use. Built in LED and PSU with a pre wired 2 metre 240v cable for connection in a remote junction box. |
| Input Voltage: | 240v |
| Light output: |
370 Lumens: |
| Installation: | Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light using a gasketed 65mm conduit box or similar weatherproof junction box.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation |