Elipta Adjustable Recessed Walkover Uplight - 240v - GU10 - IP67 - Stainless Steel
67 in stock
- Product Overview
- Downloads
- Reviews
The Elipta Adjustable Recessed Walkover Uplight is a stylish 240v recessed stainless steel uplight with a choice of 240v GU10 LEDs resulting in a much lower lens temperature, which is important in walkover areas. This garden light is fitted with a flush frosted lens as standard and features an adjustable bracket that provides up to 30° of adjustment from vertical for directional lighting.
The light is located by an ‘O’ ring on the body into a sleeve tube. To facilitate the removal of screws for future re-lamping or other maintenance, apply copper grease to the threads of all screws being fitted for retention of bezels, grills or other top plates or retaining rings. Copper grease resists degradation due to heat and protects against difficulty in removing screws, particularly where stainless steel screws are fitted with aluminium parts. It may also be used on screw threads of screw-off bezels or glare shields.
Phillips Hue lamp does NOT fit in this light.
| Colour/Finish: | Stainless Steel Top Ring |
|---|---|
| IP Rating: | IP67 |
| Construction: | The metal sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an ‘o’-ring. |
| Input Voltage: | 240v |
| Beam Angle: | Lamp holder adjustable 30° from vertical |
| Installation: | Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation. |