Elipta Alto 60 Bollard Light - Stainless Steel
65 in stock
- Product Overview
- Downloads
- Reviews
The Elipta Alto 60 Bollard Light (stainless steel) LED outdoor bollard light is constructed from quality stainless steel with distinctive glare louvres, ideal for use along paths, driveways and entrances. These garden lights are easy to bolt to paving and slabs or by using an optional ground-mount to be installed into concrete prior to electrical installation.
Additionally, galvanised ground spikes are also available for installation in planting and lawn areas, and a polycarbonate diffuser and metal louvres help stop glare from the lamp. This will work with most PIR and Photocell sensor systems (see lamps and installation materials.) The Alto stainless steel bollard lights are 60cm high and accept E27 (large screw) LED lamps -perfect for driveways where regular use requires an energy saving, long life, light source. Lower powered or dimmable lamps are available for softer ambient lighting around garden paths, decking and terraces.
| Colour/Finish: | 304 Stainless Steel |
|---|---|
| IP Rating: | IP44 |
| Construction: | 304 Stainless Steel body and opal polycarbonate diffuser |
| Input Voltage: | 240v |
| Lamp Type: | E27 - Order lamps separately |
| Installation: |
Pre-wired with 2m rubber cable for connection via T9969 underground joint kit: the installer may shorten the fitted cable to make a weatherproof connection inside the base of the light. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation |